Motion Package Specifications
Travel Method X and Y axes work piece movement
Control Method X, Y, T & C
Drive Motors Fanuc AC Servo (X, Y, T, C, Z1, Z2)
Maximum Sheet Size 60" (Y) x 196.85"" (X) with one repositioning cycle.
(Additional material support
tables required when processing material over 100" in the X-axis)
Maximum Sheet Thickness 0.188"
Maximum Material Weight 110 lb. At F1 (330 lbs. At F4)
Maximum Axis Travel 98.425" (X) by 60" (Y)
Max. Linear Table Speed (X / Y / Combined) 3934 ipm / 3149 ipm / 5039 ipm
Punching Accuracy 0.004" ( 0.0027" in High Accuracy Mode)
Positioning Accuracy 0.001"
Repeatability 0.001"
Punching System Specifications
Press Capacity 33 Tons
Press Stroke 1.457""
Stroke Rate (X/Y) Pitch Stroke Stroke Rate
0.079" 0.236" 780/498
1.000" 0.236" 500/330
Maximum Hole Diameter 4.500"
Tool Type Amada Thick Turret
Turret Rotation Speed 33 RPM
Feed Clearance 0.984"
Auto Index Rotation Speed 60 RPM
AMNC-F Controller
Model AMNC-F
Control Function X, Y, T , C, Z1,&Z2
Input Method Floppy Disk, CD ROM, USB, Ethernet, MDI, DNC
Minimum Command Unit 0.001" (X, Y) 0.010 (C)
Minimum Travel Unit 0.001" (X, Y) 0.010 (C)
Operating Modes Automatic, MDI& Manual
Display Modes Program Contents, Position Information, Program Check, Turret
Load, Program Set-up,
Parameters, Tool Hit Counter, Self Diagnostics
Interlock Displays Door Open, Clamp Open, X-Gauge block up.
Ram Control Features: Ram Cycle Patterns 277 Total
Punching 3
Nibbling 1
Forming 250
Marking 10
Knockouts 10
Slotting 4
Minimum Programmable Increment 0.001"
EMK3610 Standard Features
* High speed punching with a servo-electric, direct twin drive system that
dramatically increases ram speed and eliminates unnecessary ram motion
* 100" X-axis can process 8' sheets without repositioning which reduces
process time and improves accuracy
* Quiet operation with variable ram-stroking control maximizes hit rate
while achieving the lowest noise levels in today's manufacturing environment
* 33-ton ram delivers superior edge quality and accuracy
* 58-station multiple track turret with two 1" and two 4" auto-index
stations
* Full set of high performance, quick-adjust, large station air-blow
holders.
* Extended tool life and minimum tool maintenance with Air Blow Oil Mist
tooling
* Virtually eliminates slug pulling with the power vacuum system
* High quality, press-brake-like forming operations up to " with
programmable dwell at bottom of stroke for complete plastic deformation
* Progressive forms, flanges and embossments up to " eliminate secondary
operations
* Forming and high quality processing eliminate secondary operations
* Reduced vibration of the direct twin drive ram combined with the rigid
bridge frame ensures tighter tolerances extending tool and machine life while
producing high quality, distortion free parts
* Brush table design provides scratch-free processing, eliminating
secondary finishing.
* Free standing PC-based network CNC control allows for flexible layout.
The Loc-Jaw system was conceived to simplify, and allow greater tooling access and more versatility securing your parts when 4th and 5th axis machining. Designed to hold raw stock without a pre-op using the carrier method, penetrating material using ...
Box Jaws are suitable for heavy duty workholding on large sized lathes, large face plates fitted on Vertical Machining Centres, boring lathes and jig installations and provide a secure method of holding the workpiece.
Year of Manufacture: 2016Centre distance (mm): 8000Max swing over bed (mm): 930Max swing over cross slide (mm): 630Spindle bore (mm): 105R.P.M.: 27Volts: 400VCycles: 50
